Part # 1022076 – Tacoma Stage-3 Turbo Camshaft Set
1. Kelford camshafts must be Installed and ‘timed in’ by a qualified tradesperson. Follow the vehicle manufacturer’s Instructions for removal, re-fitting and torque specifications of any part. Follow this specification …
Part # 2019121 – Fuel Pressure Gauge Kit 2RZ / 3RZ
When installing any gauge or fitting into the fuel rail bolt, the bolt will need to be secured by a wrench when installing any components, Otherwise damage may occur on …
Part # 2019128 – Fuel Pressure Gauge Kit 22RE / 3VZ
When installing any gauge or fitting into the fuel rail bolt, the bolt will need to be secured by a wrench when installing any components, Otherwise damage may occur on …
Part #’s 1035057, 1035064, 1035056 – Fuel Gauge Kit (Low Pressure Carb Only)
To install, simply cut fuel delivery hose and place in-line. If you’re installing a regulator, you’ll want to install a “T” Fitting after regulator. You may have to “walk-it” onto …
22R/RE/RTE EGR Delete (Part #1016038, 1016039, 1016008, 1016009, 1016010)
Thank you for ordering LC Engineering’s EGR Delete! Since there are so many varying vacuum hose configurations for these engines, we have a recommended approach for installation of this kit. …
Part # 1022079 – 2RZ/3RZ Stage 3 Camshaft
Installation Instructions and Warranty Information IMPORTANT INFORMATION PLEASE READ CAREFULLY On Initial start-up do not let the engine run below 1500 rpm. To break In the camshaft run the engine …