- Assorted Drill Bits
- Desired Mounting Hardware
- Welder (optional)
- 1. Read all instructions completely and carefully before you begin.
2. Check to make sure the kit is complete and that no parts are missing. If anything is missing, please contact Trail-Gear at (559) 252-4950.
The TG Oil Carrier can either be welded to the vehicle or screwed using the integrated mounting holes found on the back and bottom of the oil carrier. When using screws, it is recommended that low prole self tapping button head screws be used to prevent damage or puncture to the oil containers being carried.
Latch Operation: The draw latch used on the oil carrier features a safety catch that must be pressed down in order to release the latch.
1,124 total views