Part # 1090010 – Cam Degree Kit

This is a universal kit that will fit just about any applications, but we have supplied specific adapters for your 20R/22R/RE/RET. Since this kit has a dial indicator with a magnetic base it can also be used checking flywheel run-out, crankshaft end-play and even ring gear backlash! Degree wheel Installation: First turn your engine over by hand to top dead …

Part # 1022053 – Tacoma Stage 3 Camshaft

Due to the larger lift, these Camshafts will also require a larger than stock “shim under” style bucket instead of the stock “shim over” style. See valve train kits: Stage 3 Master Valve Train Kit Part # 1021506 & Stage 5 Master Valve Train Kit Part # 1021510. The following figures taken @ .050 lift at valve with .000 valve …

Part # 1022051 – Stage 5 Turbo Camshaft

This Camshaft must be installed with new rocker arms. LC Engineering will not warranty any camshaft that was not purchased together with Aluminum rocker arms. LC Engineering highly recommends using our Pro Camshaft Kit (Part# 1020000) or Double Spring & Retainer Kit (Part# 1023210) when running any cam with over .460″ lift or in any application that requires a sustained …

Part # 1022048 – Stage 5 Camshaft

This Camshaft must be installed with new rocker arms. LC Engineering will not warranty any camshaft that was not purchased together with Aluminum rocker arms. LC Engineering highly recommends using our Pro Camshaft Kit (Part# 1020000) or Double Spring & Retainer Kit (Part# 1023210) when running any cam with over .460″ lift or in any application that requires a sustained …